Seamless Steel Pipe

Line Pipe

Pipeline pipes are mainly used for pipelines that transport oil and natural gas. It is mainly used in oil, natural gas, chemical, electric power equipment and other industries.

Specifications:
Out Diameter:1/4 inch-36 inch
Wall Thickness:1.25 mm-50 mm
Length:3.0m-18m
Surface treatment:oil dipping, shot blasting, painting, etc.
Delivery status:annealed, normalized, normalized + tempered and other heat treatment states

Standard:
API Spec 5L- American Standard
GB/T9711-1999- National Standard

Enviar Consulta
Whatsapp Me
Fluid Pipe

Fluid pipe is a seamless pipe used for transporting water, oil, gas and other general fluids. Mainly used in engineering and large equipment. It has good dimensional geometric accuracy and stable performance.

Specifications
Out Diameter:1/8 inch- 48inch
Wall Thickness: 1.25 mm-50 mm
Length:3.0m-18m
Surface treatment:oil dipping, paint spraying, passivation, phosphating, shot blasting, etc
Delivery status:annealed, normalized and other heat treatment states.

Standard:
GB/T 8163- 2008 National Standard (Seamless steel pipe for liquid service)
ASTM A53M American Standard (Black and hot-dipped zinc-coated steel pipes welded and seamless)
ASTM A106M American Standard (Seamless carbon steel for high temperature service)
JIS G 3454/3455/3456 Japanese Standard(seamless pipe for structural purpose)

Enviar Consulta
Whatsapp Me
Structure Pipe

Specifications
Out Diameter:1-1/4"-16"
Wall Thickness:0.109"-0.562"
Length:3.0m-18m
OD Tolerance:+/- 0.5%
WT Tolerance:+/- 10.00%

Standard Structural Steel Pipes & Tubes Specifications & Grades:
GB/T 8162 Grades 10,20,35,45,Q355A,Q355B,Q355C,Q355D,Q355E;
DIN 1629 Grades St37.0, St44.0,St55 St52, Ck45;
ASTM A53/ASME SA53 Grades A & B;
ASTM A519/ASME SA519 Grades 1020,1026,4130,4135;
ASTM A500/ASME SA500 Grades A, B, C, D,E;
EN10210-1 Grade S235JRH, S275JOH, S275J2H, S355JOH, S355J2H, S355K2H;

Enviar Consulta
Whatsapp Me
Boiler Tube

High pressure boiler tubes are used in high temperature and high pressure conditions. Steel tubes are subject to oxidation and corrosion under the action of high temperature flue gas and water vapor. The steel tube is required to have high lasting strength, high oxidation resistance corrosion performance and good stability.

Application:

Used for manufacturing superheated pipelines, the steam pipe, boiling water tube, flue tube, small flue tube, etc.of low, mediam pressure boiler, the general industry boiler

Specifications
Out Diameter:16.0mm-219mm
Wall Thickness:2.0mm-4.0mm
Length:3.0m-18m
Delivery status:annealed, normalized, normalized + tempered and other heat treatment states
Surface treatment:oil dipping, painting, passivation, phosphating, shot blasting, etc.

Enviar Consulta
Whatsapp Me
Heat Exchanger Condenser Tube

It is to reduce the loss of heat in the condenser caused by the removal of cooling water, the loss is reduced by heating the water.After the high pressure feed pump, high pressure heaters are added to increase the boiler feed water temperature and save coal resources.

ASTM A179
It is used for heat exchanger, condenser and similar heat conveying equipments
ASTM A213
It is used for boiler and super heater min wall thickness seamless steel ferrite and austenitic steel tube and heat exchanger austenitic steel tube.
ASTM A210
It is used for boiler and boiler flue tubes, including safe end, vault and supporting tube, and superheater wall thickness min or medium carbon steel tube.
JIS G3461/2
It is used for boiler and heat exchanger tube inside&outside.

Enviar Consulta
Whatsapp Me
Alloy Steel Tube

It is to manufacture wall panel, economizer, reheater, superheater and steam pipeline of boilers.
Low temperature resistant alloy tubes are seamless products,mianly the finished steel pipe has good impact toughness in low temperature environment (usually below -45℃).
The use of low sulfur and low phosphorus high purity steel and calcification treatment can effectively reduce the low temperature brittleness of steel and enhance the impact toughness of the product.

Application: In Refineries, Power Plants, Boilers, Heat Exchangers, Condensers etc.
Pipe Standard: ASME SA 335/ASTM A333/ASME SA333
Size: OD: 73-630mm / WT: 6-35mm / Length: Single Random, Double Random, Cut Length

Enviar Consulta
Whatsapp Me